Nema 14/nema 17 driver low torque application what driver?

[Desertboy]

What driver do you recommend to power a Nema 14/17 I don't want to use the A4988's as this runs 24 hours a day I just don't trust they're up to it. I need good positional accuracy 0.1mm over a rotation (It's geared 4:1 so 800 steps) works I will have a home switch will I'll use to track and correct drift if it happens

But if I'm getting drift something is wrong and needs to be fixed it'll be interference.

Home is more there in case of power off I can recover where I was

It take X steps takes a photo, logs it's position to a file and then takes another X steps. I can use the log to restore to original position in case of power off

It's a timelapse BUT timed to steps NOT time

TB6600 sound OK? I don't want to spend a lot but it does need to be accurate and capable of running 24/7 for weeks at a time

It's rotating a lazy Susan, rotation rates will be very low as should torque