Mad Professor
03-09-2010, 01:28 PM
Good Day All.
After seeing the post by windows20 "now the trouble starts (http://www.mycncuk.com/forums/showthread.php/2138-now-the-trouble-starts)" and seeing the two smallish units he picked up for around £100 each.
Has started me thinking, how often do these kind of units turn up, and are there any web sites that sell used units.
From what I have read on the internet is most of these units are not plug in and go as they have to use there software, interface cards, ect
So I am looking for a unit with all the axis, and stepper motors, but does not need the control boards, ect, as I would be replacing them.
The unit only needs to be able to drill mill, pcb's, mdf, and acrylic.
What can you recommend?
Thanks for your time.
Best Regards.
After seeing the post by windows20 "now the trouble starts (http://www.mycncuk.com/forums/showthread.php/2138-now-the-trouble-starts)" and seeing the two smallish units he picked up for around £100 each.
Has started me thinking, how often do these kind of units turn up, and are there any web sites that sell used units.
From what I have read on the internet is most of these units are not plug in and go as they have to use there software, interface cards, ect
So I am looking for a unit with all the axis, and stepper motors, but does not need the control boards, ect, as I would be replacing them.
The unit only needs to be able to drill mill, pcb's, mdf, and acrylic.
What can you recommend?
Thanks for your time.
Best Regards.