-
01-01-2018 #1
Good evening one and all. Thank you for allowing me into such an informative forum.
I've been considering a CNC router for some years, and now I'm finally in the position to embark... I was going to buy a kit, but after reading nearly every discussion on this forum, I guess I might have to build one instead.
I have a design background, and some experience using CNC machines while working in schools, as well as some knowledge of Mach 3 etc, so I feel reasonably confident that I can make things work at the computer end. The Hardware is more worrying though. I know what I need the machine to do, and I have some friends who can help with any welding, electrics or precision engineering, but I would like advice from experienced CNC builders as to a plan/design and parts list, and an expected budget. I mainly make wooden jewellery but have some plans for larger items.
NEEDS
- bed size of approx 300mm x 400mm (I can be a little flexible on this)
- z axis travel of 60mm ish.
- ability to carve fine detail (in mainly hardwoods) and occasionally cut out shapes from plywood (up to 12mm)
If anyone can offer any advice or links to self-builds that they feel would fit the bill will be gratefully received. I have perused some of the build logs, but its easy to end up off-topic when following the conversations.
Oh, and I'm based in Stockport!
-
Hi Greg and welcome to the forum I am based about 3 miles from you and am happy if you want to pop over and have a look at my machine.
..Clive
The more you know, The better you know, How little you know
-
01-01-2018 #3
Hi Clive.
Thank you for your quick reply and such a generous offer! I'd like that very much.
Can I ask what kind of machine you are running, and what kind of things you manufacture with it?
All the best
-
Can I ask what kind of machine you are running, and what kind of things you manufacture with it?..Clive
The more you know, The better you know, How little you know
-
01-01-2018 #5
Fantastic. I'd absolutely love to see your set up, and I don't think I've even seen a DIY CNC build in the flesh before. And I'm always grateful getting advice and knowledge from someone who has experience.
I have a few customers in Marple for my other side line business - gardening, so we certainly are close to one another
Thanks again Clive
-
I have sent you a PM
..Clive
The more you know, The better you know, How little you know
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: SFU1605 Ballscrew & nut - 1150mm long & 750mm long - BK/BF12 end machined - £20 each
By Maccydu in forum Items For SaleReplies: 2Last Post: 21-09-2017, 06:12 PM -
WANTED: 2 nema 23's 76mm long dual shafts 6.35mm plus one 56mm long nema 23 dual shafgt 6.35
By nobby in forum Items WantedReplies: 0Last Post: 24-09-2014, 09:57 AM -
NEW MEMBER: Hello from a lurker...
By firetrappe in forum New Member IntroductionsReplies: 16Last Post: 03-10-2013, 11:53 AM -
NEW MEMBER: Hi from long time loiterer
By r0bsk1 in forum New Member IntroductionsReplies: 0Last Post: 11-07-2012, 11:10 PM -
this site is taking a long time load or refresh pages
By deannos in forum General DiscussionReplies: 6Last Post: 15-12-2011, 10:00 PM
Bookmarks