Thread: Made a right balls up
-
06-05-2019 #11
-
The Following User Says Thank You to Crazy L For This Useful Post:
-
06-05-2019 #12
It looks like a Moschip board - you should find a driver here http://www.network-drivers.com/companies/1614.htm If that is no use, I will need more details of the hardware.
-
08-05-2019 #13
-
09-05-2019 #14
Right, I found a driver and downloaded it. It came with a thing called driverupdater or something. Alas, I couldn't install the driver as driverupdater wanted the internet and my mill pc isnt connected so it simply would not install. I got the driver from elsewhere, and again, it came with driverupdater, and as such, wouldnt install without the internet. Bum
-
09-05-2019 #15
Is this the chip on your printer port board ?
If so your printer driver is here https://www.dropbox.com/sh/fjwgmfaue...sFt6cGSta?dl=0 You will have to copy the files to a memory stick and run the Moschip setup program form the stick.Last edited by cropwell; 09-05-2019 at 06:58 PM.
-
10-05-2019 #16
Hi Cropwell.
I'm afraid not. the chip has no logo on it, just the aforementioned number and some other numbers. Such as: CH350L, 202205221, CH352PA5@1012, and 0413.
This is just for a driver, hahaha, before I even make a vague attempt at settings etc
Those stand alone controllers are looking really good about now, lol.RC cars
RC helicopters
Motorbikes
Renovating an entire house
Twatter: @CrazyLThirteen
Insta: CrazyLThirteen
-
10-05-2019 #17
Try this site http://www.johnmears.co.uk/9865IV_AA_Driver.htm
-
10-05-2019 #18
ah, thanks for that. The pci card in the picture at the top of that website page looks exactly like the one that I have. Just downloaded the driver, will have a go at installing it tomorrow. Thanks again.
RC cars
RC helicopters
Motorbikes
Renovating an entire house
Twatter: @CrazyLThirteen
Insta: CrazyLThirteen
-
11-05-2019 #19
Ok, files don't want to install as the install wizard has gone on holiday, so I need to install them manually. I put the .sys file in the drivers file of the system32 directory, and I dont know where to go from there as it's proper pc nerd stuff.
Do I need to copy and paste install info into my registry?
I'm only asking as with .sys file in place, it still says there is no driver.
-
12-05-2019 #20
Hi all. thanks to Cropwell again for finding me the pci driver. I asked a computery friend last night who told me where to put stuff, and now, the pci driver is installed, and according to device manager, it's working properly.
So....on to my next hurdle, getting mach to talk to my machine.
I have set some soft keys, for xyz etc, but they still dont work. There is clearly something I am missing in the settings department. Would anyone be able to help please?RC cars
RC helicopters
Motorbikes
Renovating an entire house
Twatter: @CrazyLThirteen
Insta: CrazyLThirteen
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
BUILD LOG: Made of aluminum, Made for aluminum: Would love design critique!
By gamingan in forum DIY Router Build LogsReplies: 13Last Post: 27-06-2017, 11:33 AM -
ballnut - balls back in via the side cover and using less balls than original
By dsc in forum Lead Screws, Nuts & SupportsReplies: 9Last Post: 16-11-2013, 04:27 PM -
How to get the balls back in a ballnut?
By Shinobiwan in forum Lead Screws, Nuts & SupportsReplies: 16Last Post: 24-03-2013, 04:35 PM -
Balls, balls and balls
By Swarfing in forum Marketplace DiscussionReplies: 15Last Post: 21-03-2013, 08:45 PM -
Lost my balls!!!
By danielbriggs in forum Lead Screws, Nuts & SupportsReplies: 26Last Post: 19-08-2010, 02:41 PM
Bookmarks