Thread: Wanted Denford spares
-
17-06-2019 #1
Hi, If anyone has upgraded their denford to mach3 and have the original parts ie stepper board etc then I would be interested in purchasing those parts.
Please contact me
Thankyou
-
19-06-2019 #2
Ive got some stuff in a box but mine had servos, so might not be of use to you, correct?
-
19-06-2019 #3
Hi Chaz,
I bought a denford microrouter which does not have servos, the Y axis on my machine does not work , just seems to judder, after eliminating the obvious causes there is a strong possibility that the lower driver board has gone. I think the top motion controller is ok but wont say no to a spare one.
I do not have extensive electronic knowledge and was wondering if I could get the same board and plug it in that might do the trick.
Ive attached the photograph of the board if the one you have is like this one then yes I would definitely like to give it a go, depending on the price he he he
Thanks
-
20-06-2019 #4
Ok, ill need to dig out the box, somewhere in storage.
-
17-05-2021 #5
-
01-02-2024 #6
Hi. Do you still have the controller boards Edendale? Thanks. Nick
-
02-02-2024 #7
-
02-02-2024 #8
Hi Nick,
FWIW, I have an older version of the plug-in board - the board on the left of the pictures in the previous posting, the one without the orange connectors and power devices. Mine has an RS232 interface and came from a working machine. Is that of any use?
Graeme
-
11-02-2024 #9
hi! I am looking for controll card for denford novamill . many thanks
-
12-02-2024 #10
Hi Csuritattoo,
I tried to PM you but your profile didn't allow it. I have a believed fully working serial type Novamill control card which is spare. Please feel free to PM me if it is of any interest.
All the best
Graeme
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WANTED: Denford Triac wanted
By MV-Agusta in forum Items WantedReplies: 4Last Post: 16-07-2017, 11:40 PM -
WANTED: Denford triac atc wanted
By stevethenovice in forum Items WantedReplies: 0Last Post: 23-02-2017, 10:34 PM -
WANTED: Wanted: denford mill + boxford tcl lathe
By mortenl in forum Items WantedReplies: 3Last Post: 13-11-2014, 04:45 PM -
WANTED: Denford EasyTurn Wanted - Boxford 125TCL & AUD Part ex.
By rnr107 in forum Items WantedReplies: 6Last Post: 24-08-2012, 11:27 AM -
WANTED: Wanted Denford Triac CNC Mill
By angusnoble in forum Items WantedReplies: 1Last Post: 15-07-2012, 06:45 PM
Bookmarks