eMachineShop Upgrade

[mchad]

For those like me that used STL export primarily there is a workaround.

Since version V1.946 or V1.947 STL export option expires on June 30 you can used a program that sets the date prior to that date and run eMachineShop with no issue.

You can find the program here.

Hope it helps someone else as it did for me. This only help for STL export.

Hey, I'm not a machinist, and only a 3d printer user, but I just wanted to THANK YOU for this incredibly helpful information. I have been using EMS for years to design 3d parts and the .stl files for my Prusa slicer. After the recent update (no idea why I did that, for something like this, if it works, I usually leave it be...) removed .stl export until a $200 bounty was paid, I tried several design apps and none came close to the ease of use and simplicity EMS provides. So getting that back is tremendous. Were you in sunny florida, I'd buy you a beer.

Thanks very much. - Mike

And thanks to Bladevane for getting this thread going.

(BTW, I actually paid EmachineShop way too much money to fab a part for a FXR, a few years ago, so I don't feel too bad using their app for my own purposes!)

[w454]

Salut à tous. Toujours un peu embêté avec le logiciel mais ça va. Voici mon adresse pour avoir la version à 1.32 Si quelqu'un veut bien me la donner voici mon adresse mail
[email protected] à toute l équipe

[Bladevane]

Benoit, Je vous ai ajouté à Dropbox afin que vous puissiez télécharger les versions 1.932 et 1.935. Après le téléchargement, vous devrez appuyer sur Ctrl + E lorsque vous déroulez la liste des options d'exportation, puis redémarrez eMachineShop. Regards, Glyn.

[Bladevane]

You should have access to versions 1.932 and 1.935. Good luck.

[overheat]

Dear Sir,
Would you please include me in the list? [email protected]
Kind regards

[Bladevane]

All sorted. You should be able to access versions 1.932 and 1.935. Regards.

[johnsattuk]

Hi
Would be much obliged if you could add me to your list

Regards
John
johnsattuk at outlook dot com

[Bladevane]

John, should be all sorted for access to versions 1.932 and 1.935. Regards.

[ProdigalPogue]

Hi Glyn,

Would you be willing to add me to your list, as well?

prodigalpogue AT gmail DOT com

Thank you kindly,
Patrick

[Bladevane]

Patrick, All done. You should now have access to versions 1.932 and 1.935.

Regards.