Thread: eMachineShop Upgrade
-
3 Weeks Ago #171
Hi Bladevane, please send me the old eMachineShop 1.932, 1.935 My email is: tsps at mail.com
Thanks,
JohnLast edited by jonhst; 2 Weeks Ago at 12:30 AM. Reason: email @ as : at
-
1 Week Ago #172
John,
Should be OK for you. Let me know if it works, or if it failed.
-
1 Week Ago #173
Hi,
it worked perfectly !.
This is what i did
(win10) :
1) I copied the file : ems.dat.1935.txt
(https://www.mycncuk.com/attachment.p...0&d=1649730249)
as:
C:\Users\Administrator\AppData\Roaming\eMachineSho p\ems.dat
2) I used RunAsDate (https://www.nirsoft.net/utils/run_as_date.html)
to open emachineshop as date: 30/07/2019
3) I pressed Ctrl+Alt+e
Then i could save dxf files.
Thank you VERY MUCH, Bladevane !!!!
Kind Regards,
John
-
1 Week Ago #174
John, Briliant. Thanks for letting me know. Good luck in your file transfer. I now use FreeCAD for DXF transfer, although other packages are available.
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
PC Upgrade Options?
By Chaz in forum General DiscussionReplies: 11Last Post: 31-08-2016, 04:53 PM -
Laser Upgrade
By dcrowder in forum Laser Machines & BuildingReplies: 8Last Post: 06-05-2016, 01:06 PM -
VFD upgrade
By paulus.v in forum Spindles & Drive MotorsReplies: 11Last Post: 05-11-2014, 11:09 PM -
Upgrade
By Dopy in forum General DiscussionReplies: 0Last Post: 09-11-2011, 01:57 AM -
BUILD LOG: Time for mk2 upgrade!
By routercnc in forum DIY Router Build LogsReplies: 16Last Post: 26-02-2011, 11:38 PM
Bookmarks