. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Your right the free version only seems to be able to do Parallel Finishing.

    The test item is a 435x153x160mm block, and I am wanting to mill four 83mm dia by 7.5mm deep holes into the top.

    The g-code output from Alibre CAM as it's Parallel Finishing go's over the hole block, and the 83mm dia holes are not that tidy.

    I guess the best thing to do now is to look at other programs.

    Is there any other free cad or cheep cad programs out there that are as easy to use as Alibre Design?

    Thanks for your time.
    Last edited by Mad Professor; 13-10-2009 at 07:02 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 15
    Last Post: 25-06-2016, 10:13 PM
  2. Design Help Pt2 Required for CNC design/Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 38
    Last Post: 21-07-2014, 02:05 PM
  3. How to get BOM out of Alibre PE
    By JuKu in forum Alibre Design
    Replies: 1
    Last Post: 21-12-2012, 11:55 PM
  4. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM
  5. alibre standard £150
    By Dan Brown in forum Computer Software
    Replies: 1
    Last Post: 12-12-2009, 06:34 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •