-
16-07-2020 #101-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
03-08-2020 #102
I am in the process of buying a controller similar to the on you have purchased, but mine will be for a lathe and use stepper drives.
When i asked Eileen about panel c with the MPG she said it could not be used at the same time as the hand MPG. I tried to rephrase it but got the same reply.
Did you confirm that there was some way the hand MPG option could be used? Is it possible to buy a machine cabinet socket to connect to the panel, and plug the mpg into that socket?
Thanks
Colin
-
03-08-2020 #103
Hi Colin,
My Manual says it can use Both at the same time but I've not tried it yet and it may be different for Lathe.? I've just set the controller up on the bench and I'll be posting a vid soon and then will post more as I get time.
I'll try to find time to plug the pendant and test it for you.
Regards the Mains Voltage on the Front panel you mentioned in your PM (sorry i forgot to reply) there isn't any mains voltage on the panel other than the 24V psu. The Start/stop buttons are not connected to anything and I will using these to control contactors etc with 24Vdc so No mains voltage will be on the panel.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
03-08-2020 #104
Just a quick update Vid of it on the bench for testing. If people are interested I'll post more Vids.
-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
04-08-2020 #105
-
04-08-2020 #106-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
08-08-2020 #107
Another video that will make you laugh at my Stupidity...
-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
08-08-2020 #108
In fairness, the position of the ESC/ENT keys is a HMI disaster (and lack of secondary confirmation) - blame the designer (and the beer!)
-
08-08-2020 #109
Funny, I managed to erase some of the original files on my Newker controller. I think they were just example files but I was confused by the strong Chinglish. I now have backups of the settings.
My docs didn't specify the password, which was NEWNEW and KERKER for the Newker controller. Took a while to find that out.
I'd like to be able to use the pendent MPG with the control panel. Currently it's one or the other on mine, so looking forward to seeing how you do that, as there are strong similarities amongst the various Chinesium controllers. The manual is unfathomable on that.
Good to get a whole day's 1-1 workshop with one of their guys. I could have done with that. Definitely a recommendation for SZGH!
You can't get Youtube in China, so they won't know / see what you are posting. But it seems they are doing a great job supporting you.
-
13-11-2020 #110
How are you getting on?
Thread Information
Users Browsing this Thread
There are currently 7 users browsing this thread. (0 members and 7 guests)
Similar Threads
-
Very Sick Lenze 534 Controller
By Ricardoco in forum Motor Drivers & ControllersReplies: 32Last Post: 09-09-2020, 11:19 PM -
FOR SALE: Fadal VMC15 4th axis. VGC . Not working after 6yr storage. sell as is or break ?
By spaaz in forum Items For SaleReplies: 3Last Post: 21-11-2019, 08:51 PM -
NEW MEMBER: Devon, UK. Fadal VMC15 10k 4 axis. Faulty VGC. Light work. Stood for 8yr.Sale/Break
By spaaz in forum New Member IntroductionsReplies: 1Last Post: 21-11-2019, 03:09 PM -
WANTED: Live-in workshop in London
By Eli in forum Items WantedReplies: 7Last Post: 11-10-2014, 11:01 AM -
Poorly siemens inverter, wont switch on.
By jonisonvespa in forum Spindles & Drive MotorsReplies: 7Last Post: 06-12-2012, 04:45 PM
Bookmarks