Thread: My new machine - Guess the make!
-
18-04-2021 #91-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
18-04-2021 #92
-
18-04-2021 #93
I had a bash at a Lithophane last night. Strange thing where the carving looks weird until you hold it up to light. Carved in that engineered stone stuff Corian/Staron
Made another video creation if you’re interested. Maybe some of you have seen a CNC in operation before?!
https://youtu.be/JeOoTEsQQMQ
-
The Following User Says Thank You to Pilsbury For This Useful Post:
-
18-04-2021 #94
Another feather in your Cap Mr. Spielberg...
-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
18-04-2021 #95
Any more suggestions Dean? What else can you do with a CNC?!
Got a garden table idea to CNC some old parquet blocks up to make a funky pattern.
-
19-04-2021 #96An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
-
The Following User Says Thank You to Kitwn For This Useful Post:
-
20-04-2021 #97
The pendant is plug and play. Dongle in a usb slot and hey presto it works like a charm.
Touch off plate and spanner’s came with the machine
-
The Following User Says Thank You to Pilsbury For This Useful Post:
-
21-04-2021 #98
Well, not exactly correct, we set it up UCCNC before you took the machine so the pendants can be added at a later date if required. This is why it just worked for you.
However, that said it's not difficult, just a few settings in the plug-in and it's working. If anyone needs any help getting one to work just ask.
Kit the pendant is just a plug-in which you select from the plug-ins and adjust a few settings, it's simple enough to do.
The Tool setter is just a "free to use" macro, I think we got it from the UCCNC forum or some website and tweaked it to suit our needs. I would normally write my own but I didn't have time to mess around and UCCNC uses C## which I'm not the best at so it would have taken me even longer.
Again it's not difficult to get working, just copy and paste job into the right macro and make a change to a few settings in the macro to account for the thickness of your offset (touch plate). The wiring is simple, just create a circuit into a single input.
When I have a little time I will post the Macro.
Oh, the spanners are just 5mm plate cut on our plasma, nothing special.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
The Following 2 Users Say Thank You to JAZZCNC For This Useful Post:
-
10-05-2021 #99
I’m back! Been off my CNC for a week or so whilst working and knocking up a garden table (home project) ..... but I did manage to squeeze a little bit of CNC into that. Cheeky little self promotion on the ends!! Might as well post a piccie seeing as it did get a little bit of CNC treatment.....
So I’ve had to get a proper fix and bang out another inlayed end grain chopping board. Really need to punt these out. I’ve got more boards than things to chop! Here’s a pic of the finished article and also a link to a video of me making it. If you’re bored and have 13minutes to spare, check it out.
https://youtu.be/4IbnvBNqFeI
-
11-05-2021 #100
Thread Information
Users Browsing this Thread
There are currently 12 users browsing this thread. (0 members and 12 guests)
Similar Threads
-
How tricky would this be to machine? I guess a Triac is not up to the job!
By suesi34e in forum Metalwork DiscussionReplies: 21Last Post: 15-06-2016, 05:11 PM -
NEW MEMBER: CNC wanabee I guess.
By aliasant in forum New Member IntroductionsReplies: 2Last Post: 07-11-2014, 10:34 PM -
plasma advise sought, want to make a a3-a2 sized machine
By nobby in forum Plasma Table MachinesReplies: 1Last Post: 16-07-2014, 02:53 PM -
Make your own Super- PID ... not that hard to make ! .... says electronics genius!
By Buba b in forum General ElectronicsReplies: 4Last Post: 26-04-2013, 08:37 AM -
RFQ: help needed to make cnc machine maybe 2-3 and will pay
By scnc in forum Projects, Jobs & RequestsReplies: 10Last Post: 22-11-2012, 12:31 AM
Bookmarks