Thread: A little clear out
-
27-02-2021 #1
-
27-02-2021 #2
What are the circuit breakers
Are they suitable for a cnc cabinet?
The e stops look handy as well
Also what is the transfer in the front of the first picture any voltages on it
Cheers. Paul
Sent from my iPhone using Tapatalk
-
27-02-2021 #3
Are the black motors with the ally on the end stepper motors and is the ally part some form of gearbox ?
If so I’d be interested in a few of them
Had a look online and can’t find any info on them
Sent from my iPhone using Tapatalk
-
28-02-2021 #4
Hi Paul
E-stops will do perfect for this type of work
I will take some better pictures for you tomorrow so you can make a better call than me for the other bits
And yes that is a gearbox on the end of the stepper motor and no i dont know the ratio :-D
malc
-
28-02-2021 #5
Excellent. Cheers. Paul
Sent from my iPhone using Tapatalk
-
28-02-2021 #6
What is the frame size of the steppers Bernie?
And how long before they go in the skip. I know we are locked down but I can go out to fix appliances, so If your works heaters need attention I could visit.
-
28-02-2021 #7
And i am not fluent in itallian Paul but could Giri (on the plate ) indicate the ratio
-
28-02-2021 #8
That’s a good call john
In which case these would be excellent for a project that I have in mind
Paul
Sent from my iPhone using Tapatalk
-
01-03-2021 #9
-
01-03-2021 #10
Hi Malc
The nema flange designation would be the size of the square flange in inches so looking at the ones with gearbox I am guessing from your caliper Nema 34 and I would like a couple of those if possible .
https://www.kollmorgen.com/en-us/dev...ma-frame-size/
Difficult to see if the ones which you say you have only four are bigger or smaller but the square size of the flange would tell us .
E stops? yes please
Breakers? yes please
Are there any distinct drivers or are they incorporated into the machines boards?
Anything there that looks like a power supply? I certainly see transformers both toroidal and conventional.
Am thinking that the it would be good to have the opportunity to have what in Cumbria we would call a "ratch".
For those who do not understand our lovely dialect I am thinking of a rummage amongst the contents of the heap ,
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
12V air pressure system to clear chips?
By RobC in forum General ElectronicsReplies: 8Last Post: 25-04-2019, 11:10 PM -
SOLD: Clear out time!
By komatias in forum Items For SaleReplies: 7Last Post: 24-03-2018, 11:41 AM -
eBay: Job lot stepper motors to clear collect from portsmouth plus 3 x ball screw
By ccw in forum Items On eBay UKReplies: 1Last Post: 18-07-2017, 08:54 AM -
FOR SALE: Connectors, Heat sinks and other parts clear out....
By Jimmybristol in forum Items For SaleReplies: 3Last Post: 09-02-2011, 06:00 PM -
FOR SALE: 48V Power Supply - The clear-out continues
By Jimmybristol in forum Items For SaleReplies: 2Last Post: 09-02-2011, 02:14 PM
Bookmarks