-
14-10-2021 #1
I am new to cnc and I purchased a workbee 750 x 1000 cnc from bulkman beginning of last year. I built the machine without any problem, and decided I would follow the video's on bulkmans resources and run it with mach 3 software. I spent an age wiring all as instructed and down loaded Mach 3. I can navigate a computer but i am not really that confident and knowledgeable with this software.
After many attempts and 3 NVM CNC controllers later( as I thought this was the problem) I still cannot get my drivers or spindle to work to the software.I did for about 10 minutes once but when I switched laptop off for the evening, next day nothing and back to nothing.
I must have spent hundreds of hours searching the web and trying different ports and pins strategies. I have come to the conclusion i am really rubbish and need from someone who knows what they are doing to get it going. I have attached my wiring, wiring diagram I have followed and some of my pins and ports pages. I am using a aspire laptop.
If anybody has the patience to navigate me through my incompetence it would be massively appreciated.I just don't know what I am doing wrong.
Russ Bates
-
25-07-2022 #2
https://youtu.be/Q8Krv5y152g
This might help, he's got the same controller. I remember watching that ages ago
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ooznest Workbee CNC 4th axis wiring
By Lucky83 in forum Machine DiscussionReplies: 0Last Post: 30-04-2021, 09:11 AM -
Problems with a new 3040 machine
By Lennewton in forum Chinese MachinesReplies: 20Last Post: 03-07-2019, 05:42 PM -
Workbee with Duet 2 wifi and planet cnc
By ravihotwok in forum Control Hardware & SystemsReplies: 9Last Post: 20-06-2019, 09:26 AM -
Stuga routermaster problems computer dont seem to be connected to machine
By aled in forum Milling Machines, Builds & ConversionsReplies: 7Last Post: 16-01-2013, 04:11 PM -
NEW MEMBER: Beginning machine shop needs help with CNC Step High Z S400 Problems
By NorthernLightsMachines in forum New Member IntroductionsReplies: 2Last Post: 24-07-2011, 09:41 AM
Bookmarks