-
09-04-2022 #1
After changing to a 3rd generation board from ENGMATE I am having problems getting it to run.
On start up everything moves fine using the arrow keys on the pc keyboard. But when I try to run a file to cut the x and y move intermittent while the program runs fine on the pc. If I switch the board and stepper drivers off and back on it will eventually run as it should, missing some steps at the start. Sometimes this can take several attempts.
When it does run it has more than ample power with no stalling issues
Last edited by Bobnire; 12-04-2022 at 09:17 PM. Reason: Better detail
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Boxford TCL160 missing steps.
By tay100 in forum Boxford LathesReplies: 1Last Post: 14-01-2022, 05:27 PM -
Please help - missing steps ... Mach3
By emilvv in forum Artsoft Mach (3 & 4)Replies: 21Last Post: 23-12-2019, 08:31 AM -
How I solved MY missing steps problem.
By davegrennan in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 18-10-2015, 08:27 PM -
New machine bogging down / missing steps
By James123 in forum Gantry/Router Machines & BuildingReplies: 16Last Post: 19-12-2014, 12:02 AM -
Missing Steps + Stalling X-axis
By danielbriggs in forum Linear & Rotary MotionReplies: 5Last Post: 02-09-2010, 02:59 PM
Bookmarks