Thread: which spindle motor will work
Threaded View
-
29-03-2024 #1
Hi , i have a denford triac atc ,im going to give it some love . i currently have it running with a 24000 rpm water cooled spindle geared down . 5/6000 rpm is good when cutting aluminium which i mainly do . But i would like to cut steel at lower rpm . this spindle loses all torque at slow speeds.
I've recently retired so i have time now for an upgrade . i would love to be able to tap, cut steel and aluminium at reasonable rpm . so is this a pipe dream and i have to have 2 machines or is there a motor/setup i can use that will do a half decent job and not be extremely expensive .
im quite prepared to build a new spindle motor mount as i have some hiwin linear rails for x,y.z i have already bought .
cheers
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Electric or pneumatic Spindle for stone work ?
By Fivetide in forum Machine DiscussionReplies: 0Last Post: 23-07-2021, 01:03 PM -
Will this VFD work with this motor?
By ChrisMe in forum General ElectronicsReplies: 4Last Post: 05-03-2021, 12:48 PM -
Recommendation VFD and motor capable of reversing that will work with Centroid Acorn
By ChrisMe in forum General ElectronicsReplies: 2Last Post: 28-02-2021, 10:15 AM -
cant get spindle to work with Mach3
By Bucks in forum Chinese MachinesReplies: 16Last Post: 01-10-2017, 09:53 PM -
AC servo motor to replace a 3 phase induction motor on a mill spindle.
By rnr107 in forum Spindles & Drive MotorsReplies: 2Last Post: 23-04-2014, 03:14 PM
Bookmarks