Thread: Base design for new router
-
31-08-2010 #1
I am posting a base design for my next router build the bed is a fixed height from the floor and the router can be adjusted to allow for larger work. this router is 2' x 4" allowing for a full sheet 4' x 8’ to be indexed through it. I will use my plasma CNC to cut the end panels. It has min. welding. Each of the 3" x 3" uprights are fixed to the end panels in two planes perpendicular to each other.
-
31-08-2010 #2
sorry i attached the wrong file
-
31-08-2010 #3
I attached the wrong file
this is the right one
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Vertical router design
By EddyCurrent in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 29-03-2014, 10:43 PM -
My second router design
By Joe in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 03-05-2013, 06:07 PM -
Router design thoughts
By m_c in forum Gantry/Router Machines & BuildingReplies: 21Last Post: 11-09-2012, 07:06 PM -
Design help etc required with DIY CNC Router Design / Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 04:50 PM -
Need 6' x 4' bed, 4 axis router design.. Help..!
By fasteddy in forum Gantry/Router Machines & BuildingReplies: 29Last Post: 17-09-2010, 12:56 PM
Bookmarks