-
20-01-2011 #1
New Member, Dec 2010.
Retired Professional Engineer (Mechanical). Served five year apprenticeship in late '50's as fitter-turner. Currently converting a GL45 dovetail bench mill to CNC using steppers (very slowly), with a Gecko 540 and Mach 3, using a Compaq Laptop thru a Warp 9 USB/Parallel interface card - seems to work well! Also have an AL330 lathe (~6" swing x30"), a pre-war Myford and a power cut-off band saw - beats a hand hacksaw any time.
NzOldun
-
21-01-2011 #2
Hi,
Welcome to the site, your membership has been approved and you now have full access.
Please post your questions in the correct forums for the best assistance.
Lee.Me
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
threading ground bar ends
By dazza in forum Metalwork DiscussionReplies: 39Last Post: 11-02-2014, 11:41 PM -
Adding earth cable to 2.2Kw Chinese Spindle
By Dwayne Dibbley in forum Generic Chinese SpindlesReplies: 4Last Post: 13-03-2013, 04:04 PM -
Drivers,BOB and PSU are in a PC case, do i earth the case
By deannos in forum Motor Drivers & ControllersReplies: 4Last Post: 27-11-2011, 03:43 PM
Bookmarks