-
25-02-2011 #1
Hi, i recently got a leitz router bit 2nd hand that i intended to use for trenching on strings.
When i tried to put it in my router i realized the shank is slightly smaller than the standard shank, its slightly under 11.5mm.
I cant seem to find anything on the size of this shank but when i look on the leitz site it does a lot of cnc bits.
So my question is, is this a bit for a cnc machine.
photos attached if you want to see it
Thanks for any replies!!
-
27-02-2011 #2
Can anybody confirm this is a cnc shank size????
-
27-02-2011 #3
It could be that Leitz provide their own custom collets, for their own custom shanks sizes, lets see what we can find...
A quick look on their website found this link: 5. Cutting tools with shank
If you confirm the Collet Chuck, they provide information on each and also a list of spare parts for the Chucks.
It looks as though they offer shank sizes from 6-24.5mm, what type of router have you got?
Cant confirm if it is a "cnc shank size" as cnc stands for? (Computer Numerical Controlled) :naughty:.
Lee.Me
-
27-02-2011 #4
Thanks for your answer! measured the shank in decent light and it is actually a 12mm shank, thought that was a bit of an odd measurement (maybe my tape stretched when i first measured it lol).
Im using a makita 3612.
Thanks for the link, didnt think to look at cnc collets. it does mention 12mm so guess its a cnc bit then.Last edited by gazza; 27-02-2011 at 01:47 PM.
-
27-02-2011 #5
No problem, so the next question is...
Can you get a 1/2" Collet for the Makita and how well will it hold a 12mm shank (0.7 discrepancy) ?
You may get away with locking the collet nut nice and tite to take up that .7, however to save all the trial and error could you not use a cutter with a shank size you do have a collet for. Cutter diameter isn't critical here is it?, it shouldnt be because you could use a smaller cutter and make more pass's to get the finished trench width?
Lee.Me
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WANTED: Wanted: Cnc router at least 1200 x 1200 bed size
By swinds in forum Items WantedReplies: 1Last Post: 10-12-2012, 08:11 AM -
3040 size router plans?
By m_c in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 24-06-2012, 04:15 PM -
WANTED: ER20/25 straight shank collet chucks
By m_c in forum Items WantedReplies: 4Last Post: 24-10-2011, 12:19 PM -
Stepper shaft size and pulley bore size problem
By psiron in forum Linear & Rotary MotionReplies: 13Last Post: 15-06-2010, 04:11 PM -
What size (3mm shank) ball endmill should buy?
By HankMcSpank in forum Tool & Tooling TechnologyReplies: 16Last Post: 28-07-2009, 12:07 AM
Bookmarks