Thread: Self levelling epoxy resin
-
22-10-2011 #1
Hi,
I am trying to find a source of self levelling epoxy resin which I can use to mount linear guide rails on, but I have not been able to find a suitable product here in the uk ?
If you know of anything that would be suitable pleas do let let me know.
Thanks
-
23-10-2011 #2
Try these guys: http://www.wessex-resins.com/westsystem/
I've found them very helpful. They sell liquid resin and all sorts of fillers so you can make your own mix. They should be able to advise you as to the best mixture to use.
Russell.
-
19-11-2020 #3
Simply you can get it anywhere from amazon or ebay.
-
20-11-2020 #4
The most common system recommended for this job is West Systems resin type 105 with the type 209 very slow hardener. Check out the build logs for details of how it should be used.
An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
-
21-11-2020 #5-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
21-11-2020 #6
Fancy letting myself get caught out by that one!
There may be one modern reader somewhere who found the info useful, so I'm not too upsetAn optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Epoxy granite or mineral casting
By mike mcdermid in forum Gantry/Router Machines & BuildingReplies: 46Last Post: 20-02-2014, 06:21 PM -
Epoxy Granite Molds?
By gavztheouch in forum Moulding MachinesReplies: 8Last Post: 18-02-2014, 07:28 PM -
Epoxy pouring advice
By cncJim in forum General DiscussionReplies: 12Last Post: 18-02-2014, 05:25 PM -
Epoxy cast plastic injection tools
By gavztheouch in forum Moulding MachinesReplies: 0Last Post: 27-01-2014, 11:33 PM -
BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
By Greeny in forum DIY Router Build LogsReplies: 8Last Post: 19-08-2013, 08:26 PM
Bookmarks