Thread: Some parts.
Threaded View
-
20-03-2012 #1
I got some parts water cut that aren't square on the edges. these will need to be milled down to get rid of the taper left by the water cuttingthey are an odd shape so It may be difficult to clamp in to your machines, if needs be, I'll re-buy the alu but hopefully it wont resort to that.the other part is a panel and a motor mount, It's just 20 holes and 4 slots. the motor mount is quite simple also.
I have the materials and postage is about £8 one way so that's fine for me to pay both ways.
Water Cutting.dxf
On the motor mount, the dashed lines are holes drilled from the side that will be tapped m6.
The Zig zags are the side that need to be taken down a bit and there are two of them.
If you guys think you can do it, send me a PM!
This needs to be done ASAP as I'm fed up of not having a cnc machine!
Thanks!Last edited by jcb121; 20-03-2012 at 08:48 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
First couple of parts...
By Wal in forum Metalwork Project ShowcaseReplies: 10Last Post: 14-02-2014, 03:41 PM -
RFQ: Parts need turning
By ams in forum Projects, Jobs & RequestsReplies: 17Last Post: 15-01-2014, 12:27 AM -
2.2kw spindle parts
By Tomnewry in forum General ElectronicsReplies: 3Last Post: 14-12-2013, 09:30 PM -
NEW MEMBER: CNC Router Parts
By CRP in forum New Member IntroductionsReplies: 4Last Post: 29-10-2013, 02:37 AM -
RFQ: MDF parts required.
By mZeles in forum Projects, Jobs & RequestsReplies: 9Last Post: 25-10-2013, 01:28 PM
Bookmarks