Thread: Bought mesen a new laser
-
29-07-2012 #1
Awesome machine.
Takes A3 sized material.
Been playing around with odd bits, got it to engrave on stainless but needs some more experimenting. Gone a load of key fobs that were needed,more to try it out than do key fobs.
First paying job was yesterday.
These are 35 mm diameter and you cannot buy them. It's part of a vacuum valve that when it goes wrong you junk it and buy new but all that happens is crap get on the brass seating inside and just wants cleaning off. Only problem is the gasket splits when you strip it and it's next to impossible to make a new one. that small hole in the leg is 0.5mm.
Heres a crap vid of it cutting, about 12 seconds actual cut time.
This is one of it's next jobs.
John S -
-
29-07-2012 #2
looks nice, my mate has one and has had a load of trouble with it. His one is blue though so that could be the problem.
-
29-07-2012 #3
-
29-07-2012 #4
What colour do I need to paint it to be reliable ?
John S -
-
29-07-2012 #5
I,ll up the anti to a pack of hobnobs and a bottle of beer. Best of luck with the laser.
-
29-07-2012 #6
Hell for that I would give him a hole box of hobnobs (12 packets from memory).
"If first you don't succeed, redefine success"
-
29-07-2012 #7
-
29-07-2012 #8
-
29-07-2012 #9
Piss off you heretics. You are only trying to wind me up.
John S -
-
30-07-2012 #10
What power laser is it John.? What's it's max cutting capability material wise.?
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Bought a laser, now there's a thing
By Robin Hewitt in forum Laser Machines & BuildingReplies: 26Last Post: 25-02-2013, 07:20 AM -
Oops, I just bought this....
By irving2008 in forum Marketplace DiscussionReplies: 15Last Post: 24-08-2012, 10:58 AM -
Well I bought one off ebay..
By Fivetide in forum Marketplace DiscussionReplies: 15Last Post: 23-08-2012, 02:28 PM -
WANTED: GCc Laser Pro or Epilog Laser Cutter Machine
By Brownhills school in forum Items WantedReplies: 1Last Post: 10-05-2012, 04:30 PM -
Woo Hoo, I just bought me a mill :)
By irving2008 in forum Milling Machines, Builds & ConversionsReplies: 11Last Post: 05-11-2008, 07:43 PM
Bookmarks