Thread: operation cnc
-
11-01-2013 #101
-
14-01-2013 #102
Garden full of snow, baltic weather. But not in my workshop ;)
properly cosy.
Right, quick update then.
Ordered replacement ballnut from Chai, aswell as four ballscrew blocks... Im also now waiting on more bandsaw blades.
not quite sure where im going to put the Y stepper... should of perservered with drawings.. but too impatient.
seperately, i have been given literally 2 tons of metal off-cuts. Its mainly 4mm and 5mm plate but some 3mm. all funny sizes but cut with machinery so all square. I think its galvanised?
anyway ive got far too much, and it was free so If anybody here needs any, come collect it. (leicester) The photo doesnt do how much ive got justice my estate car was on its arches with three loads. There is loads.
-
15-01-2013 #103
I have been looking for some scrap metal to practice welding but I guess galv isn't ideal? Not sure? I begged some scrap from a local fabby but have nearly run out...if it's suitable for arc welding practice I'd gladly take some off your hands!!
-
15-01-2013 #104
Love the burner btw !
-
15-01-2013 #105
Machine looks good too. G
-
28-01-2013 #106
ssssshhhhhhh******tttttttttt
so.... you guys always talk about planning planning planning... well ive made a big mistake
the ballscrew nut housing, that are bought paid for and on their way from china... are 86mm wide
WHAT a sausage.... I dont have that much space!!!
what am I going to do?
this is compounded by the fact ive ordered 4 of them, 2 for the x, 1 for y and 1 for z
Z dont fit
and guess what
so, when you've finished laughing... and can think of some constructive ideas... let me know
Plucked up the courage to finish the Y though...
-
28-01-2013 #107
If you've got the ballnut mounts from Chai they'll look nothing like the diagram he's sent you. They'll just be a steel block which you may be able to thin down the 86mm to less than 60mm. I dont have access to mine from Chai at the moment to get exact measurements but would say its deffo possible.
-
28-01-2013 #108
-
29-01-2013 #109
KingCreaky,
I would try and mod the ones you have, but failing that this is a link to the mounts that I mentioned to you on Sunday.
Ball nut mount for 1605, 1610 ballscrew, free shipping to any country! | eBay
Jim
-
02-02-2013 #110
so, after sitting about feeling sorry for myself.. Ive made atleast a temporary measure... not sure if its good enough for the stresses of milling ali... but will be good enough for now I hope.
fortunately ive got that old ballnut... the one I broke previously... useful...
so; heres the plan
cut the circle out with the band saw (roughly). so it will go in my three jaw lathe chuck.
bore the center out with lathe
then get cutting and tapping...
seems to work... (Jonathon... if you need any help with your 'engineering' give me a shout
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Milling machine CNC conversion - keep hand wheels for manual operation?
By birchy in forum Milling Machines, Builds & ConversionsReplies: 5Last Post: 23-10-2016, 08:29 PM -
clunks / missing steps - DM856 and single pulse operation
By dsc in forum Motor Drivers & ControllersReplies: 37Last Post: 09-12-2013, 02:22 PM -
screening / glitchy operation - sanity check
By dsc in forum General ElectronicsReplies: 21Last Post: 01-12-2013, 11:35 PM -
CNC3040 erratic stepper motor operation (fixed)
By DanielF in forum Motor Drivers & ControllersReplies: 0Last Post: 30-12-2012, 07:52 AM -
BUILD LOG: Operation Clueless, CNCRP 4848 Build Log Eventually.
By BedlamRik in forum DIY Router Build LogsReplies: 12Last Post: 28-12-2012, 12:39 AM
Bookmarks