Thread: Centec 2 ballscrews
Hybrid View
-
11-07-2023 #1
Please you are back on your project In the meantime soldiered on and after a year. Just fitted a ballscrew to the feed of my Centec 2A. It was a 2 but I managed to get a 2A body that fits the base and as expected all the upper parts. Ran with a borrowed Stepper Motor and a battery drill. My electronics associate in this project is working on the controls. Only current problem is when doing some milling with the drill as power to form key shapes in end of 1/4 inch rod a possible vibration from the cut dislodged the circlip at the driven end. Looking to see if alternative ends possible.
Mike
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Centec 2A or Sieg x3
By Web Goblin in forum Milling Machines, Builds & ConversionsReplies: 16Last Post: 26-07-2017, 11:38 AM -
Bended ballscrews. What i can do?
By ba99297 in forum Lead Screws, Nuts & SupportsReplies: 25Last Post: 13-04-2017, 01:41 PM -
machining ballscrews
By T0rnado69 in forum Lead Screws, Nuts & SupportsReplies: 11Last Post: 13-04-2014, 11:39 PM -
Centec 2A rebuild
By Web Goblin in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 02-04-2013, 08:41 PM -
WANTED: Centec 2A manual
By Web Goblin in forum Items WantedReplies: 0Last Post: 03-09-2012, 09:56 AM
Bookmarks