-
10-04-2014 #1
just a little one for making brackets and the like.
want to cut at least 5mm steel plate.
can you point me in the duirection of a plasma cutter.
is it possible to have no movement in the z axis, simply setting the machine for 5mm plate
adding 1mm under grate for 4 -etc.
I realise I don't need heavy duty motors?
do i need to have the ball screws to the sides?
is it wise to invest in rtwo sided belt drives for the x axis
whaere do you get them
do you use a floor grate as the sacrificial doofer?
-
16-07-2014 #2
Hi
have a scan through this forum and check all the threads by me - Davek0974
I recently built a small machine and you will likely find 90% of your answers in the threads somewhere, pictures too.
Dave
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Flappy machine - Advise needed please!
By cncJim in forum Machine DiscussionReplies: 22Last Post: 01-11-2013, 03:23 PM -
LIMAC knife cutting machine and plasma machine, cnc router latest video
By therouterlady in forum Manufacturer NewsReplies: 0Last Post: 18-09-2013, 05:28 AM -
Make your own Super- PID ... not that hard to make ! .... says electronics genius!
By Buba b in forum General ElectronicsReplies: 4Last Post: 26-04-2013, 08:37 AM -
RFQ: help needed to make cnc machine maybe 2-3 and will pay
By scnc in forum Projects, Jobs & RequestsReplies: 10Last Post: 22-11-2012, 12:31 AM -
Opinions sought on cheap desktop PCB milling machine
By ksangeelee in forum Milling Machines, Builds & ConversionsReplies: 55Last Post: 16-03-2012, 01:57 PM
Bookmarks