-
14-02-2016 #21
-
14-02-2016 #22
-
14-02-2016 #23
-
14-02-2016 #24
So far in last year I 've used 8 of these boards and none have yet had any problem all used in small machines cutting 1/2" Lexan, I did the electronics for a company that built their own machines, so either I am lucky or have a good supplier.
Will let you know if I get a bad one.
-
14-02-2016 #25
Multi axis driver boards do not have a good reputation on this forum. There may be some makers in China who are less attentive to quality and I am wary of the safety and reliability of electrics made in China where inferior materials have been used in manufacture. I suppose if you buy from a UK dealer with a good reputation, you have a better chance that they have sourced a good supplier, but you can never be sure. UK, German or American made electronics may be more reliable, but for amateurs like me, they are just too pricey.
-
17-02-2016 #26
After I read about your mods I remembered I had some small box section kicking about, with that I found myself nocking something up for mine, I'd been meaning to do for awhile, it needs some paint and the end caps haven't turned up from the bay yet...
but can you "guess wadit'is yet" ?
The bottom/tray is is just some 1.5 mil ali sheet I had, it's pop riveted on.
.MeLast edited by Lee Roberts; 17-02-2016 at 10:26 PM.
.Me
-
17-02-2016 #27
-
The Following User Says Thank You to njhussey For This Useful Post:
-
18-02-2016 #28
-
The Following User Says Thank You to magicniner For This Useful Post:
-
23-01-2020 #29
More workshop stuff . . .
-
The Following 2 Users Say Thank You to routercnc For This Useful Post:
-
30-01-2020 #30
Episode 2 : making the control box and deep dive into the XSY AT1 inverter setup. Impressed so far (for the price) . .
-
The Following User Says Thank You to routercnc For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 20 users browsing this thread. (0 members and 20 guests)
Similar Threads
-
Good quality pillar drill?
By newtoid1986 in forum Machine DiscussionReplies: 6Last Post: 19-04-2013, 01:40 PM -
Pillar Drill Restoration
By Treemonkey in forum Machine DiscussionReplies: 0Last Post: 24-03-2013, 07:42 PM -
pillar drill?
By wilfy in forum Machine DiscussionReplies: 22Last Post: 10-11-2012, 09:18 PM -
Something for the metalworking guys
By John S in forum Computer SoftwareReplies: 1Last Post: 21-06-2010, 11:00 PM -
Dead pillar drill...
By irving2008 in forum Machine DiscussionReplies: 11Last Post: 27-10-2008, 03:54 PM
Bookmarks