-
15-04-2024 #101
Starting the enclosure for the knee lift electronics. I seem to like making it complicated!
-
04-05-2024 #102
Almost finished the enclosure . . . .
-
17-05-2024 #103
After sorting out some electrical issues the enclosure is finally working!
-
26-05-2024 #104
Updating the software . . . plus more hardware issues found!
-
28-05-2024 #105
For the video above some people have shown an interest in the code so here it is in a zip file. This will open in most text readers if you only want to browse it, but to upload it to an Arduino microprocessor use the Arduino IDE software and paste the code in there. This is written in a version of C++.
The code is flat, no library calls or function calls are made (except for the LCD library).
There is some code duplication for similar functions, but I was OK with that.
The pulse generation is coded directly, but libraries are available to do this for you.
There are no interrupts, but it would be more elegant overall to use them.
There are probably many other ways to do this and probably better ways!
But it does work, and it runs fast enough for me.
Use it, modify it, laugh at it, whatever works for you. If you do use it as it is right now then include the text at the beginning so people know the source.
drillpressknee_v12.zip
-
09-06-2024 #106
Well here we are, the last episode in the drill press upgrade series . . . . . probably.
-
19-09-2024 #107
-
19-09-2024 #108
Thanks. To be honest making the videos helps me stay on track and finish them!
-
The Following User Says Thank You to routercnc For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
Good quality pillar drill?
By newtoid1986 in forum Machine DiscussionReplies: 6Last Post: 19-04-2013, 01:40 PM -
Pillar Drill Restoration
By Treemonkey in forum Machine DiscussionReplies: 0Last Post: 24-03-2013, 07:42 PM -
pillar drill?
By wilfy in forum Machine DiscussionReplies: 22Last Post: 10-11-2012, 09:18 PM -
Something for the metalworking guys
By John S in forum Computer SoftwareReplies: 1Last Post: 21-06-2010, 11:00 PM -
Dead pillar drill...
By irving2008 in forum Machine DiscussionReplies: 11Last Post: 27-10-2008, 03:54 PM
Bookmarks