Thread: Quick bit of help
-
28-08-2014 #1
Hi all im trying to set up my 60-40 cnc . now i have set it up as they say in the instructions on mach3 . i have just run some code and the part came out bigger that the drawing by 15.6mm . Im i rite in thinking this is something to do with the steps per --- ? the instructions say it needed to be 400 . any help would be great
mick
-
28-08-2014 #2
Yes it is, read this
http://www.mycncuk.com/threads/7733-...0877#post60877
Also this, they are using a different screen but the idea is the same.
https://www.youtube.com/watch?v=EVrqObwaAF4Last edited by EddyCurrent; 28-08-2014 at 05:17 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
28-08-2014 #3
thanks for that. i had am idea that the instruction was incorrect
-
28-08-2014 #4
i love the internet that took me about 5 mins to change them . Now its perfect .
Thanks again
-
29-08-2014 #5
dont know if any one will pick this up . but i need recommendations for 4 core shielded cable. im gonna replace mine
thanks mick. uk btw
-
This is one place http://quickbit.co.uk/Cable/CY-Cable...-0-75mm-4-core but if you do a search on here you will find a better place (cable) or here; http://www.electrical-trader.co.uk/c...-cy-cable.html ..Clive
Last edited by Clive S; 29-08-2014 at 08:03 PM.
-
29-08-2014 #7
Said it before but I'll repeat it because those 2 places are the same.? (Same number). . . . I don't like Quickbit cable as it's brittle and actually think it's the same stuff they use on these chinese machines, it's certainly feels like it.
I use CSE cables. Never had any trouble with it and used 100's of meters. http://www.csecables.com/acatalog/CY-Cable.html
-
29-08-2014 #8
thanks again all. is 1.5mm upto the job ?
-
29-08-2014 #9
-
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Contemplating DIY build; quick hi and q's
By brumster in forum New Member IntroductionsReplies: 6Last Post: 16-12-2013, 04:03 PM -
a 4th axis... and quick
By kingcreaky in forum Marketplace DiscussionReplies: 5Last Post: 29-10-2013, 11:34 AM -
Need a quick hand with some resitors please
By Fivetide in forum General ElectronicsReplies: 4Last Post: 07-04-2013, 08:58 PM -
quick reply box
By wilfy in forum General DiscussionReplies: 3Last Post: 01-03-2013, 11:10 AM -
Quick question
By m.marino in forum General DiscussionReplies: 2Last Post: 18-02-2011, 04:30 PM
Bookmarks