Steppers and drivers

[Davidh]

I am in UK and not willing to import from outside Europe.

What steppers and drivers should I buy to make my machine run like this?

[ame="http://www.youtube.com/watch?v=2I966WNS_uM"]YouTube - MDA Precision X2-X5 CNC Controller[/ame]

Thanks

[Gary]

If you have an X2 then our SY60 motors are a good choice for X and Y and Z.

If it is a bigger machine like the X3 use the same for X and y and a larger nema 34 like the SY85STH80 or 118.

I have 2 X SY60 and a SY85STH118 on my X3 super.

I am in UK and not willing to import from outside Europe.

What steppers and drivers should I buy to make my machine run like this?

YouTube - MDA Precision X2-X5 CNC Controller

Thanks

[Davidh]

"SY60 motors are a good choice"

Thanks G.

So wouldn't that be the PM542 Microstepping Driver to match?

Edit..should have said it is the Wabeco mill

[Gary]

Yes, the SY60 runs at 2.1A in series and 4.2A in parallel, so this driver has enough current to run in either wiring configs.

"SY60 motors are a good choice"

Thanks G.

So wouldn't that be the PM542 Microstepping Driver to match?

Edit..should have said it is the Wabeco mill