-
26-01-2016 #1
Evening All,
Autodesk have tried to help but I am over 7 almost 8 hours of trying to get itinstalled and no further along than when I started. Fushion 360 was put on mymachine prior to having Norton. Since the install of Norton the free trial ofFushion expired so I took it off on the understanding if I reinstalled I couldkeep the software for year on re-registering.
If you have got this far reading my message you have probably grasped that I amno wiz kid on computers but I think there must be an easier way. I think theissue may be something to do with Norton then again it could just be me goingwrong. A couple more hours of trying and I think I will have to send the PC tothe computer engineer.
Thanks for any thoughts
Steve
-
27-01-2016 #2
Hi Steve,
Fusion should ask you whether you want to buy ths software or something. At that point it will give you the option to say that you are a startup or hobbyist.
Norton may be blocking some of the ports that Fusion uses to access the "Cloud" so worth googling if others are seeing this issuehttps://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
27-01-2016 #3
Hi Komatias,
Tar very much for the reply and adivce. Yes, it states the startup option it all looks like it is fine then at 2% in on probably the first 15 attempts it stops and comes up with Invalid entry Erronn 13 and a load of stuff I have no idea on! Later attempts got to 1% and failed in a similar way so not good. I think it is dam Norton I have tried to turn off parts of Norton but I have no idea what I am turning off! I am going to have some explaining to do if I take the computer to the engineer who told me not to put it on, that much I do know. I did not want to leave it on the side mind having brought it.
Thanks for the help
Steve
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Installing Huanyung VFD on Heiz Zero3 Controller
By artmin in forum Heiz CNC RoutersReplies: 16Last Post: 16-09-2021, 01:25 PM -
Installing Mach 3 is driving me mad!
By tonygagey in forum Artsoft Mach (3 & 4)Replies: 16Last Post: 13-07-2015, 01:20 PM -
Reversed axis on a AXYZ 6010 after installing DNC controller software...
By RickyThunders in forum Machine Control SoftwareReplies: 1Last Post: 12-02-2013, 03:56 AM -
Options for installing linear guide rails ?
By flanagaj in forum Gantry/Router Machines & BuildingReplies: 8Last Post: 15-10-2011, 12:09 AM -
Installing Mitsubishi inverter FR-E520S-2.2K-EC
By Colin Barron in forum Motor Drivers & ControllersReplies: 5Last Post: 25-09-2010, 07:02 PM
Bookmarks