Fingers crossed it'll cut ally

[GEOFFREY]

Michael, Simon, I would post the dxf here, but don't seem to be able to do so. That is why I asked for email. Will check on my pump sizes tomorrow and post. Obviously my drawing is to suit my machine and will need modding. I have made 2 circuits, one for each pump. Each pump is simply plugged into a double socket and switched on and off as necessary, no valves, reservoirs or vac controllers etc. very simple,but effective.
JAZZ's offer of the free trespa sounds unbelieveable - Almost makes me wish I was a "northerner". G.

Any help on how to add an attachment on here would be very useful. thanks. G.

[birchy]

Geoffrey, if you click "Go Advanced" in the bottom right corner of the "Quick Reply" box, you get some extra options, one of which is "Add Attachment". the icon looks like a sheet of paper with a paper clip on it.

[GEOFFREY]

Thanks Birchy, trying that nowvac bed.dxf





I have tried to open it here, but the grooves (channels) seem a bit incomplete. My dxf output was set to six decimal places, maybe I should have reduced that. Any way let me know if it is readable, if not I'll try again. G.

[birchy]

Looks OK in DraftSight on my Linux machine.